Larsen Waterproof Tanking Kit 4m² – 4L Membrane, Tape & Primer for Wetrooms


Price:
Sale price£49.99

Description

The Larsen Waterproof Tanking Kit is a multi-component waterproofing system for wet area installations. It gives a secondary waterproof barrier beneath tiled surfaces in showers, wet rooms and bathrooms, and includes self-adhesive tape for the joints and corners, which are the most vulnerable points in any tanking installation. Each kit contains a 4L water-based liquid membrane, 5m of self-adhesive tape and 0.5L of acrylic primer, and covers approximately 4m² in two coats.

What's in the kit

  • 4L water-based liquid membrane – brush-applied flexible waterproof coating for walls and floors
  • 5m self-adhesive tape – flexible joint sealing tape for corners, wall-to-floor junctions and board joints
  • 0.5L acrylic primer – prepares the surface before the membrane goes on

Key properties

  • Water-based, brush-applied membrane for walls and floors
  • Self-adhesive tape for joints and corners
  • Suitable for use under ceramic and porcelain tiles
  • Compatible with most cement-based tile adhesives
  • For use on concrete, sand/cement, plasterboard and tile backer board
  • Interior wet area applications

Where to use it

  • Showers and wet rooms – walls and floors under tile in shower enclosures and wet room floors.
  • Bathrooms – splash zones around baths and basins.
  • Utility and changing areas – any interior area at risk from water under tiling.

Coverage

Approximately 4m² per kit, applying the membrane in two coats. Measure the full area to be tanked before ordering, including the floor and the wall areas inside the enclosure, as a shower with two or three tanked walls can easily exceed 4m². Allow for more than one kit where needed, plus extra tape for longer runs of corners. Larger wet rooms will need several kits, or see the Onboard waterproofing kit which covers up to 10m².

Application outline

  1. Make sure the substrate is sound, clean and dry, and that boards are fixed and joints supported.
  2. Apply the acrylic primer and allow it to dry.
  3. Fit the self-adhesive tape to internal corners, wall-to-floor junctions and joints.
  4. Brush on the first coat of membrane, working it into the tape, then apply a second coat once the first is touch dry.
  5. Tile with a flexible cement-based adhesive once the membrane has dried, taking care not to pierce it.

Always follow the technical datasheet for drying times, which depend on temperature and conditions.

Frequently asked questions

Is this a complete wet room kit?
It contains everything for the main waterproofing: primer, membrane and tape. It does not include pre-formed corners, pipe collars or drain gaskets, so order those separately if your installation needs them. See our ProfiX Pro fleece tanking tape, internal corners, external corners and pipe collars.

How many coats do I need?
Two coats of membrane. Coverage of approximately 4m² per kit is based on two coats.

What can I apply it to?
Concrete, sand/cement, plasterboard and tile backer board.

What adhesive should I use on top?
Most cement-based tile adhesives are compatible. A flexible adhesive such as Larsen Fast Set Flex is a good choice.

Can I use it outside?
No. It is for interior wet area applications.

Does tanking replace sealing the tile grout?
Tanking is a secondary barrier behind the tile. It does not replace correctly sealed movement joints and silicone at corners and junctions.

Pair it with

Build the substrate with tile backer boards or an Onboard tileable wetroom shower tray, bond tiles with our tile adhesives and finish with tile grout. See all tanking kits.

Download the Larsen Waterproof Tanking Kit Technical Datasheet (PDF)