{"product_id":"ultra-tile-prodeck-square-complete-wetroom-system","title":"Ultra Tile ProDeck Square Complete Wetroom System","description":"\u003ch2\u003eUltra Tile ProDeck Square Complete Wetroom System\u003c\/h2\u003e\u003cp\u003eThe UltraTile ProDeck Square Shower Tray Wet Room Kit is a complete wet room system comprised of a UltraTile ProDeck shower tray, drain trap kit and a waterproofing kit — available in 12 sizes to suit any wetroom project.\u003c\/p\u003e\u003cp\u003eThe ProDeck Square Shower Tray is a blue coloured self-supporting shower tray with a pre-formed minimum fall of 2% that can be used with tiles, resin, vinyl and micro-cement floor coverings. Measuring 22mm at the outer edges, it allows barrier-free installation with most timber and cement board substrates, is self-supporting and can span joists with a load bearing capacity of 470kg.\u003c\/p\u003e\u003cp\u003eBuilt with reinforced fibreglass and 50% recycled material, it is 100% recyclable after use — ideal for projects with environmental requirements. It can be trimmed to size using a diamond saw.\u003c\/p\u003e\u003ch3\u003eAvailable Sizes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e900 x 900 x 22mm\u003c\/li\u003e\n\u003cli\u003e1000 x 1000 x 22mm\u003c\/li\u003e\n\u003cli\u003e1135 x 770 x 22mm\u003c\/li\u003e\n\u003cli\u003e1200 x 800 x 22mm\u003c\/li\u003e\n\u003cli\u003e1200 x 900 x 22mm\u003c\/li\u003e\n\u003cli\u003e1200 x 1200 x 22mm\u003c\/li\u003e\n\u003cli\u003e1300 x 800 x 22mm\u003c\/li\u003e\n\u003cli\u003e1400 x 900 x 22mm\u003c\/li\u003e\n\u003cli\u003e1450 x 1150 x 22mm\u003c\/li\u003e\n\u003cli\u003e1500 x 800 x 22mm\u003c\/li\u003e\n\u003cli\u003e1650 x 900 x 22mm\u003c\/li\u003e\n\u003cli\u003e1800 x 800 x 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease note: This product is only available on a 2-3 day delivery service.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProDeck Square Wetroom Tray (size as selected)\u003c\/li\u003e\n\u003cli\u003e155 x 155mm Stainless Steel Square Drain Grating\u003c\/li\u003e\n\u003cli\u003eUltra Tile ProAqua Shield Tanking Kit (covers up to 8m²)\u003c\/li\u003e\n\u003cli\u003e1L ProPrimer\u003c\/li\u003e\n\u003cli\u003e10m Jointing Tape\u003c\/li\u003e\n\u003cli\u003ex2 Internal Corners\u003c\/li\u003e\n\u003cli\u003ex2 Pipe Collars\u003c\/li\u003e\n\u003cli\u003ePaint Brush\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProDeck Tray Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural load-bearing\u003c\/strong\u003e — accepts 470kg loading over 400mm joist centres without deflection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting\u003c\/strong\u003e — no under-boarding required over 400mm joist centres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrimmable\u003c\/strong\u003e — can be cut to size using a diamond saw\u003c\/li\u003e\n\u003cli\u003eComposed of resin gel \u0026amp; reinforced fibreglass\u003c\/li\u003e\n\u003cli\u003eManufactured using 50% recycled material \u0026amp; 100% recyclable\u003c\/li\u003e\n\u003cli\u003ePre-formed minimum fall of 2%\u003c\/li\u003e\n\u003cli\u003eCompatible with tiles, resin, vinyl and micro-cement floor coverings\u003c\/li\u003e\n\u003cli\u003e22mm depth across all sizes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSquare Drain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e155 x 155mm stainless steel grating supplied as standard\u003c\/li\u003e\n\u003cli\u003eHigh flow rate: 47 litres\/minute\u003c\/li\u003e\n\u003cli\u003eRemovable mechanical water trap prevents foul air from escaping\u003c\/li\u003e\n\u003cli\u003e40mm solvent weld connection\u003c\/li\u003e\n\u003cli\u003eTwo-part design for easy installation\u003c\/li\u003e\n\u003cli\u003eOptional upgrades available separately: tile-in grating (130x130mm), brushed brass, copper, bronze, or black finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProAqua Shield Tanking Kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy-to-use paint-on waterproofing system\u003c\/li\u003e\n\u003cli\u003eCovers up to 8m²\u003c\/li\u003e\n\u003cli\u003eQuick curing time\u003c\/li\u003e\n\u003cli\u003eDries into a flexible waterproof membrane\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Depth\u003c\/th\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePre-formed Fall\u003c\/th\u003e\n\u003ctd\u003eMinimum 2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Load\u003c\/th\u003e\n\u003ctd\u003e470kg over 400mm joist centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrain Flow Rate\u003c\/th\u003e\n\u003ctd\u003e47 litres\/minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrain Connection\u003c\/th\u003e\n\u003ctd\u003e40mm solvent weld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard Grating\u003c\/th\u003e\n\u003ctd\u003e155 x 155mm stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eResin gel \u0026amp; reinforced fibreglass (50% recycled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/5794\/7096\/files\/Instarmac-ProDeck-Installation-Brochure.pdf?v=1783010679\" target=\"_blank\"\u003e\u003cstrong\u003e📄 Download Installation Guide (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eInstallation Guide\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePlease thoroughly read these instructions before undertaking any work.\u003c\/strong\u003e These instructions assume the wetroom has been appropriately designed and all plumbing and electrical work is to building regulations. These instructions cover the most typical level floor installations on suspended timber or solid concrete floors.\u003c\/p\u003e\u003ch3\u003eInstallation on Timber Floors\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove the floorboards to expose the joists in the area where the ProDeck will be fitted.\u003c\/li\u003e\n\u003cli\u003eInspect the existing joists and if in doubt, take remedial action to ensure the floor is strong and free of movement.\u003c\/li\u003e\n\u003cli\u003eIf joist centres are 400mm or less, the ProDeck can be laid straight over the existing joists without under-boarding.\u003c\/li\u003e\n\u003cli\u003eIf joist centres are over 400mm, install additional noggins for support.\u003c\/li\u003e\n\u003cli\u003eAll edges of the ProDeck must be supported.\u003c\/li\u003e\n\u003cli\u003eLay the ProDeck in position and consider the waste location and connection.\u003c\/li\u003e\n\u003cli\u003eInstall the drain and connect the waste.\u003c\/li\u003e\n\u003cli\u003eTo fix the ProDeck, pilot drill, countersink and screw down securely with appropriate wood screws.\u003c\/li\u003e\n\u003cli\u003eCheck to make sure there is no movement and that the ProDeck is level.\u003c\/li\u003e\n\u003cli\u003eUse additional fixings if movement is detected. ProDeck can be screwed down anywhere on the surface, not just around the edges.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eInstallation on Existing Concrete Floors\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eIf insetting the ProDeck, the area beneath the deck must be cut and chiselled out to accommodate the deck, drain and waste pipe.\u003c\/li\u003e\n\u003cli\u003eConsider the waste pipe connection before proceeding.\u003c\/li\u003e\n\u003cli\u003eInstall the drain into the ProDeck and connect the waste.\u003c\/li\u003e\n\u003cli\u003eBed the deck down on tile adhesive or sand and cement.\u003c\/li\u003e\n\u003cli\u003eEnsure the deck is level then allow to fully dry.\u003c\/li\u003e\n\u003cli\u003ePilot drill the deck and securely screw down.\u003c\/li\u003e\n\u003cli\u003eCheck to make sure there is no movement and that the tray is level.\u003c\/li\u003e\n\u003cli\u003eUse additional fixings if movement is detected. Screw heads must be countersunk into the tray.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eDepending on how the ProDeck is installed, the floor may need to be levelled to the same height as the deck — screed or tile backer boards are commonly used. Tile adhesive or 2-part filler should be used to fill any small gaps.\u003c\/p\u003e\u003ch3\u003eTanking Instructions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eImportant: The entire surface of the ProDeck must be tanked before tiling. Do not tile directly onto the ProDeck without tanking first.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eTanking Overview\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTank at \u003cstrong\u003eminimum 1000mm\u003c\/strong\u003e up the walls and 1000mm into the room from the edge of the wet area.\u003c\/li\u003e\n\u003cli\u003eThe entire surface of the ProDeck must also be tanked.\u003c\/li\u003e\n\u003cli\u003eThe aim is to create one continuously tanked area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003ePreparation\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAbrade the entire surface of the ProDeck to provide a key and remove contaminants. Clean the area removing all loose material and dust.\u003c\/li\u003e\n\u003cli\u003eFill any gaps using tile adhesive or a 2-part filler and allow to dry.\u003c\/li\u003e\n\u003cli\u003ePrime the entire area to be tanked, including the ProDeck, following guidelines on the bottle.\u003c\/li\u003e\n\u003cli\u003eInstall corners first, then overlap the joint tape onto them. All joints within the wet area must be covered. Bed corners, tapes and drain collar into the tanking paste.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTanking Method\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eStarting from the corner and working outwards, apply the first tanking coat with a brush or roller, painting in one direction.\u003c\/li\u003e\n\u003cli\u003ePaint the tanking onto and fully cover the entire drain gasket collar.\u003c\/li\u003e\n\u003cli\u003eAllow this coat to dry before applying a second coat in the opposite direction. Allow to dry fully.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCleaning \u0026amp; Maintenance\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLift out the NOOD water trap.\u003c\/li\u003e\n\u003cli\u003eRinse the NOOD water trap using water only. \u003cstrong\u003eDo not use bleach, bleach-based, caustic cleaning products or hair dye products on or in the NOOD water trap.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplace the NOOD water trap using two thumbs at each short end. Apply a small amount of washing-up liquid around the top rubber gasket to ease reinsertion.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eTechnical Helpline: 0300 1240941\u003c\/strong\u003e  |  \u003ca href=\"https:\/\/www.instarmac.co.uk\" target=\"_blank\"\u003einstarmac.co.uk\u003c\/a\u003e  |  \u003ca href=\"https:\/\/www.ultratileadhesives.co.uk\" target=\"_blank\"\u003eultratileadhesives.co.uk\u003c\/a\u003e\u003c\/p\u003e","brand":"Ultra Tile","offers":[{"title":"900 x 900 x 22mm","offer_id":57887369527679,"sku":"UT PDeck 101 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1000 x 1000 x 22mm","offer_id":57887375720831,"sku":"UT PDeck 104 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1135 x 770 x 22mm","offer_id":57887375753599,"sku":"UT PDeck 107 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1200 x 800 x 22mm","offer_id":57887375786367,"sku":"UT PDeck 110 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1200 x 900 x 22mm","offer_id":57887375819135,"sku":"UT PDeck 102 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1200 x 1200 x 22mm","offer_id":57887375851903,"sku":"UT PDeck 103 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1300 x 800 x 22mm","offer_id":57887375884671,"sku":"UT PDeck 105 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1400 x 900 x 22mm","offer_id":57887375917439,"sku":"UT PDeck 108 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1450 x 1150 x 22mm","offer_id":57887375950207,"sku":"UT PDeck 106 SQ","price":719.99,"currency_code":"GBP","in_stock":true},{"title":"1500 x 800 x 22mm","offer_id":57887375982975,"sku":"UT PDeck 111 SQ","price":649.99,"currency_code":"GBP","in_stock":true},{"title":"1650 x 900 x 22mm","offer_id":57887376015743,"sku":"UT PDeck 109 SQ","price":829.99,"currency_code":"GBP","in_stock":true},{"title":"1800 x 800 x 22mm","offer_id":57887376048511,"sku":"UT PDeck 112 SQ","price":859.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/5794\/7096\/files\/ultratile-prodeck-shower-tray-wet-room-kit-square-drain_jpg.avif?v=1783065390","url":"https:\/\/www.millcot.com\/products\/ultra-tile-prodeck-square-complete-wetroom-system","provider":"MILLCOT","version":"1.0","type":"link"}