{"product_id":"proaqua-shield-one-coat-tanking-kit","title":"Ultra Tile Fix ProAqua Shield One-Coat Tanking Kit 9kg","description":"\u003cp\u003e\u003cstrong\u003eUltraTile ProAqua Shield\u003c\/strong\u003e is a high-performance, one-coat tanking kit designed to deliver reliable waterproof protection to walls and floors before tiling. Suitable for commercial environments, wet rooms, domestic bathrooms, kitchens and showers, ProAqua Shield combines a flexible waterproof coating with integrated membrane tape for reinforcing vulnerable joints and junctions — giving tilers a fast, single-coat route to a fully tanked, tile-ready surface.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cp\u003eUnlike multi-coat tanking systems, ProAqua Shield is designed for rapid, single-coat application with no priming required, meaning tiling can commence in as little as 90 minutes. This significantly reduces programme time on wetroom and bathroom installations while still delivering robust, long-term protection against water damage and moisture ingress in the areas most prone to it.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eIdeal for wet rooms, showers, domestic bathrooms, kitchens, utility and laundry rooms, communal showers, steam rooms and saunas. Suitable for both walls and floors prior to tiling, and compatible with a wide range of substrates including concrete, sand\/cement screed, plywood, tile backer boards, anhydrite screeds, plaster, plasterboard, render, brickwork and blockwork.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-coat application — no priming required\u003c\/li\u003e\n\u003cli\u003eTiling can commence after just 90 minutes\u003c\/li\u003e\n\u003cli\u003eIncludes 10 metres of membrane tape for junction reinforcement\u003c\/li\u003e\n\u003cli\u003eBlue coloured coating for easy visual coverage checking\u003c\/li\u003e\n\u003cli\u003eManufactured under BS EN ISO 9001, ISO 14001 and ISO 45001\u003c\/li\u003e\n\u003cli\u003eAligns with BS EN 5385 tiling installation guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eRecommended for use with UltraTile ProSS Flex (C2), ProFlex SP Rapid Set (S1) or ProFlex S2 fibre-reinforced flexible tile adhesives once fully cured. Pair with UltraTile ProPrimer on suitable substrates for a complete, specification-backed wetroom build-up.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eMillcot supplies genuine UltraTile trade products with full technical and safety datasheets, backed by knowledgeable trade support — helping you specify and install with confidence.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-coat tanking system for walls and floors\u003c\/li\u003e\n\u003cli\u003eRapid drying — tile within 90 minutes\u003c\/li\u003e\n\u003cli\u003eIntegrated 10m membrane tape included\u003c\/li\u003e\n\u003cli\u003eSuitable for commercial and domestic wet areas\u003c\/li\u003e\n\u003cli\u003eNo priming required on most substrates\u003c\/li\u003e\n\u003cli\u003eReinforces vulnerable joints, corners and upstands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWetroom and shower floor and wall tanking\u003c\/li\u003e\n\u003cli\u003eDomestic bathroom waterproofing before tiling\u003c\/li\u003e\n\u003cli\u003eKitchen splashback and floor waterproofing\u003c\/li\u003e\n\u003cli\u003eUtility and laundry room waterproofing\u003c\/li\u003e\n\u003cli\u003eCommunal shower, steam room and sauna tanking\u003c\/li\u003e\n\u003cli\u003eCommercial wet area waterproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit size:\u003c\/strong\u003e 9kg (coating + 10m membrane tape)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1.1kg per m² per coat — approximately 8m² per 9kg unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication thickness:\u003c\/strong\u003e Minimum 0.8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying\/tiling time:\u003c\/strong\u003e 90 minutes (extends below 20°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e 5°C to 30°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage temperature:\u003c\/strong\u003e 5°C to 30°C, frost-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 12 months unopened\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003eTimings and coverage vary with temperature, substrate porosity and site conditions. Refer to the full technical datasheet before specifying.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eEach 9kg unit of ProAqua Shield includes the flexible waterproof coating plus 10 metres of membrane tape for reinforcing joints, corners and upstands.\u003c\/p\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I can tile over ProAqua Shield?\u003c\/strong\u003e\u003cbr\u003eTiling can typically commence after 90 minutes, though this extends in temperatures below 20°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to tank the shower tray as well as the walls?\u003c\/strong\u003e\u003cbr\u003eTanking the shower tray is strongly recommended alongside the walls and floor, though not always a strict requirement — check local building regulations for your installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs ProAqua Shield suitable for use with all tile adhesives?\u003c\/strong\u003e\u003cbr\u003eDispersion (ready-mixed) adhesives can significantly extend drying times or prevent complete curing depending on tile type — cement-based flexible adhesives such as UltraTile ProFlex are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat substrates is ProAqua Shield suitable for?\u003c\/strong\u003e\u003cbr\u003eConcrete, sand\/cement screed, plywood (15mm+), tile backer boards, anhydrite screeds, firm plaster, plasterboard, render, new brickwork and blockwork, once properly prepared.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed before applying ProAqua Shield?\u003c\/strong\u003e\u003cbr\u003eNo priming is required on most suitable, sound substrates prepared in line with the technical datasheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does one unit cover?\u003c\/strong\u003e\u003cbr\u003eEach 9kg unit covers approximately 8m² at the recommended coverage rate of 1.1kg per m².\u003c\/p\u003e","brand":"Ultra Tile Fix","offers":[{"title":"Default","offer_id":58160897229183,"sku":"UTF PROAQUA SHIELD 09","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/5794\/7096\/files\/Ultra-ProAqua-Shield-Tanking-Kit_a133597f-21af-4c3b-8432-be6783b7a324.png?v=1786460623","url":"https:\/\/www.millcot.com\/products\/proaqua-shield-one-coat-tanking-kit","provider":"MILLCOT","version":"1.0","type":"link"}